1. Q:

My external hard drive seagate 1TB is not recognized in laptop, what software will i use to fix this problem?

My external hard drive seagate 1TB is not recognized, it was not being detected with my laptop ...what software will i use to fix this problem? i search in the enternet on what to do...i follow all of them but it doesn't work...the drive still working because it blinks light which means the the program or format of the drive needs to fix ......i really need the data inside.

1. A:

When the hard disk can not be recognized, should not be easy to do the physical maintenance of the hard drive, be sure to have enough patience to find a solution. 2: The hard disk can not be identified, there are many hardware and software reasons, sometimes the file system or partition table damage, this situation, the direct use of data recovery software will be able to recover data; sometimes the motherboard configuration is damaged, the motherboard configuration reset to Factory settings, remove the motherboard battery and re-install the battery, in many cases this simple means will be able to solve the problem; some of the most common very simple problem, only need to clean up the computer parts of the dust can be; 3: Even if you have tried a variety of solutions, still can not solve the problem, do not be discouraged, have patience, still do not easily physical maintenance hard drive. 4: similar to the problems I mentioned earlier, and sometimes, the hard disk used for a long time, he just need to rest for some time, sometimes for another computer, only need more time to wait. It should be noted that some failures are caused by insufficient power supply 5: If in the end anyway can not solve the problem, do physical testing should be very cautious, at least in the detection of non-destructive means to be used. 6: A serious failure of the old hard drive, backup and recovery of important data, try not to continue to use.

2, Use Aidfile data recovery software "Full Scan" to scan the drive.

Software Manual >>